Bilstein 40-45mm Lift Kit - Nissan Navara NP300 Coil Rear Coil Rear 05/2015-11/2020 Series 1-4

For over 50 years Bilstein have been the leaders in Monotube Shock Absorber technology. Each Bilstein B6 Offroad shock absorber is assembled by hand in Germany, and the B6 Offroad shocks are designed and tested in Australia, to suit the harsh conditons that Australia throws at them. No matter if it is your daily driver, or a nation-wide tourer, Bilstein shocks will be able to handle it. 

 

This is a complete Bilstein B6 Offroad lift kit for a Nissan Navara NP300 with coil rear suspension Coil Rear 05/2015-11/2020 Series 1-4

 

 

Important Note:

• If you have a Series 3 or Later NP300, Nissan have revised the Rear Suspension due to many customer complaints from the owners of Series 1 and 2 vehicles about the poor load carrying capacity.
• On the Series 3-On, the Rear is already Raised approx 25mm over the older models, so adding Raised coils will not lift it another 40mm from there, otherwise the Rear would be extremely "Tail up" ..... Expected Rear Lift for Series 3-On is approx 20mm

 

 

The kit contains:

• 2x Bilstein B6 Offroad Front Shock Absorbers
• 2x King Front Coil Springs
• 2x Bilstein B6 Offroad Rear Shock absorbers
• 2x King Rear Coil Springs

 

 

Optional Extra's

• Rear Swaybar Extension & HID Headlight Alignment Kit.
  Will be required on all vehicles equipped with HID Headlights to reset headlight aim after fitting Suspension Lift & is strongly recommended on all vehicles to help reset Swaybar Angles after a lift is fitted to help maximise Travel
• On HID equipped Vehicles, use all 3 parts in the kit.
• On Non HID equipped Vehicles, just use the Swaybar Relocation Brackets in the kit.

 

 

 

 

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.

 

.

 

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.