Bilstein 45-50mm Lift Kit - Nissan Pathfinder R51 2.5L Diesel & 4.0L V6 Petrol (2005-2013)

For over 50 years Bilstein have been the leaders in Monotube Shock Absorber technology. Each Bilstein B6 Offroad shock absorber is assembled by hand in Germany, and the B6 Offroad shocks are designed and tested in Australia, to suit the harsh conditons that Australia throws at them. No matter if it is your daily driver, or a nation-wide tourer, Bilstein shocks will be able to handle it. 

This is a complete Bilstein B6 Offroad lift kit for a Nissan Pathfinder R51 2.5L Diesel & 4.0L V6 Petrol 2005-2013

The kit contains:

• 2x Bilstein B6 Offroad Front Shock Absorbers
• 2x King Front Coil Springs
• 2x Bilstein B6 Offroad Rear Shock absorbers
• 2x King Rear Coil Springs

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.
• On R51 Pathfinders, if raised too far the Wheel Alignment will not be able to be corrected without the fitment of offset control arm bushes Front & Rear to compensate for the vehicle sitting too high.

Please Note:

• All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.