Blackhawk Upper Control Arm - Next Gen Ranger Excluding Raptor

PLEASE NOTE - These vehicles are fitted with either a Steel or an Alloy knuckle between the top and bottom ball joint, the ball stud in the upper ball joint is different to the lower spec models with Steel Knuckles.

*You MUST Check your Vehicle Prior to Ordering*

- Steel Knuckle XL & XLS Models ONLY

- Alloy Knuckle XLT, WILDTRACK/ SPORT/PLATINUM ONLY

These Engineered upper control arms are designed to correct the balljoint angle with built in 3deg caster when you lift your vehicle 40mm and over

Blackhawk UCA's are designed with clearance to the coil spring during articulation, as well as strengthening the whole unit over the standard parts.

Sold as a pair kit with hardware included, These UCA's are a cost effective & simple solution to your alignment problems. Blackhawk UCA's use OE size parts (bushes and ball joints) meaning spares can be obtained from any spare parts shop, or genuine from Ford. 

Kit Contains:

• 2 x Blackhawk UCA's pre-fitted with OE style rubber bushes
• 2x Roadsafe HD Ball Joints pre-fitted to the control arms
• 2 x Blackhawk Ball Joint Dust Caps
• 2 x Dust Cap sealing O-Rings

These UCA's are designed to fit:

• Ford Ranger Next Gen