CalOffroad Platinum Series Front Coilover 2-3" Lift - Gen2 Mazda BT-50 10/2011-08/2020

CalOffroad Platinum Series Pre-Assembled Bilstein Coilover

Kit Contains:

• 1x Pre-Assembled Strut
• Comes assembled with CalOffroad Platinum Series Coil
• Strut Top Mount
• CalOffroad Bilstein Long Travel Monotube Strut 2" to 3" Lift

CalOffroad has strong roots with the offroad market that began in the early 80s .Spending time in the USA with industry leaders building the latest in vehicle design and offroad suspension technology. Testing offroad designs in Moab Utah and Colorado. We have our own offroad testing facility that we use to refine and develop products.

This combined experience allows us to create the most advanced 4 wheel drive suspension components available in Australia and anywhere in the world.With the over 30 years of 4x4 and suspension development this has helped us bring the most advanced technology into our suspension range.

Front Accessories Weight Options:

Light Duty = 0-50kg of Accessories

Medium duty = 50-100kg of Accessories

Heavy Duty = 100kg+ of Accessories

Features:

• CalOffroad has developed the Platinum Bilstein Series creating the most advanced and Smoothest Bilstein coilover.
• Our CalOffroad Platinum Struts & Shocks are developed with direct R&D with head Bilstein engineers and tested allowing us to bring you the most advanced Bilstein coilover on the market.
• We have refined these shocks and struts over the years with platform changes to bring you the world leading shocks they are today.
• The CalOffroad Platinum Bilstein struts and shocks are not a rebranded Bilstein from some other model car. These are purpose built from Bilstein Germany to meet the stringent quality requirements & demands for each vehicle model.
• The CalOffroad Platinum struts feature multiple spring seat grooves allowing you to fine tune the front ride height.
• CalOffroad Platinum Series Bilstein struts and shocks feature the proprietary valving and IFP (internal floating piston technology), this IFP separates the high pressure nitrogen gas from the oil eliminating shock fade and oil foaming
• All CalOffroad Platinum Coilovers are assembled in Australia.
• CalOffroad Platinum Struts & Shocks are high end fully rebuildable IFP technology shocks made in Germany & Fully Rebuildable in Australia.

Suits:

• Gen2 Mazda BT-50 10/2011-08/2020

Important Notes for setting up your Vehicle Correctly:

• When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
• ** It is Critical not to fit Heavy Duty Springs to suit Accessories that are not fitted yet fitted, or you are going to have problems with alignment and electronics **
• We recommend fitting Accessories 1st and then set the Suspension up to cope with them.
• Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
• Please do not put Occasional Loads into your "Constant" Load determinations.
• Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended working range.
   

Please Note:

All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories. 
Parabolic Leaves are suited to Empty Vehicles Only, not Vehicles carrying a Constant Load.