Roadsafe Heavy Duty Recovery Point Kit - Next Gen Ranger Sport, XLT, Wildtrak, Platinum & NF Amarok

This recovery point kit is designed to fit:

• Ford Ranger Next Gen XLT
• Ford Ranger Next Gen Sport
• Ford Ranger Next Gen Wildtrak
• Ford Ranger Next Gen Platinum
• Volkswagen Amarok NF 

 

 

Note: As tow points are designed based on a standard vehicle, if your vehicle has any aftermarket parts installed (eg; bull bar, nudge bar, bash plate, etc.) this may affect fitment.

Please check the Roadsafe Fitment guide by clicking on the link below Prior to Ordering to ensure fitment for your vehicle.

https://roadsafe.com.au/resources/tow-point-bull-bar-fitment-guide

If the vehicle is fitted with the factory bumper, the bumper and lower lip of the bumper will need to be trimmed accordingly.

Where the opening in the bumper is for the factory tie down point, there is a symmetrically opposing mold detail.

This can be used as a stencil and will need to be removed.

 

 

Decent recovery points should be mandatory on all four wheel drives. In fact, there is a reason every 4WD club in Australia will specify that before even commencing driver training, the vehicle must have quality recovery points fitted.

From the factory, most vehicles have towing and tie down points fitted to the chassis, and a common misconception is that these are safe for recovery. The factory fitted tie down & towing points are for strapping down the vehicle on a ship or tow truck only, these are not to be used as recovery points, and have been known to shear off, with potentially fatal consequences.

 

Roadsafe design all of their recovery points as a vehicle specific kit, including all hardware. All kits are FEA tested and rated accordingly, ensuring that you and any spectators are safe during any recovery. Don't be fooled by cheap knock offs that are not rated!

 

Sold as a pair kit with hardware included, these recovery points are essential before you go out and hit the tracks.

These recovery points are rated to 5000kg each , and accept a 4750kg Bow Shackle or 9000kg Soft Shackle in each point. 

 

 

 

Kit Contains:

• 1 x LHS Main Body
• 4 x Side Mount Plate
• 2 x Lower Mount Body
• 2 x Centre Gusset
• 1 x LHS I/Cooler and Undertray Mount
• 2 x Crush Tube 
• 1 x LHS Rail Spacer
• 1 x RHS Main Body
• 1 x RHS I/Cooler and Undertray Mount
• 1x RHS Rail Spacer 
• All Required Hardware