25-50mm Lift Kit with Bilstein Shocks Toyota Landcruiser 100 Series IFS (1998-2007)
For over 50 years Bilstein have been the leaders in Monotube Shock Absorber technology. Each Bilstein B6 Offroad shock absorber is assembled by hand in Germany, and the B6 Offroad shocks are designed and tested in Australia, to suit the harsh conditons that Australia throws at them. No matter if it is your daily driver, or a nation-wide tourer, Bilstein shocks will be able to handle it.
This is a complete Bilstein B6 Offroad lift kit for a Toyota Landcruiser 100 Series IFS
The kit contains:
- 2x Bilstein B6 Offroad Front Shock Absorbers
- 2x HD Upgraded Front Torsion Bars Adjustable from 0-50mm of Lift
- 1x Lower Control Arm Brace Kit
- 2x Bilstein B6 Offroad Rear Shock absorbers
- 2x King Rear Coil Springs
Please choose your engine from the menu, as Petrol and Diesel use different Length Torsion Bars.
Note: We Very Stronly Recommend a Diff Drop Kit as shown in our listing pictures for lifts in the front end of over 25mm to asist with CV Shaft Angles.
Important Notes for setting up your Vehicle Correctly:
- When selecting Springs to suit your lift, please Select Springs only to suit Current "CONSTANT" Loads Front and Rear.
- Towing Loads are not included in your Constant Load Calculations, as they are not "Constant" Loads.
- Please do not put Occasional Loads into your "Constant" Load determinations.
- Selecting a load rating that is too heavy for your setup will result in Poor Flex Off-Road, Compromised Suspension Travel & Rough Ride, and will cause damage to your new shock absorbers and other components by pushing them outside of their intended range.
- All lift heights stated are estimated lift heights, due to the large number of variables in each different vehicles setup and accessories.
Check our Warranty Page
Be The First To Review This Product!
Help other Auto Parts Co PTY LTD users shop smarter by writing reviews for products you have purchased.