DCS Trolling Motor 24v Lithium Battery Bundle Deal - 24v 100ah Smart Lithium Battery + Victron 240v Charger
| Specifications: | – |
|---|---|
| Nominal Voltage | 25.6V |
| Nominal Capacity (1Hr) | 100Ah |
| Case Dimensions (L x W x H) | 520mm x 238mm x 217mm |
| Weight | 24.40 Kgs |
| Cycling voltage | 23.0~ 29.2V |
| Charge voltage | 28.6 ~ 29.2V |
| Float Voltage | 27.0V |
| Maximum Charge Current | 100A |
| Recommended Charge Current | ≤70A |
| Maximum Discharge Current | ≤200A |
| BMS (built in) | Automatic cell balancing, over discharge/charge |
| Cell Chemistry | DCS 3.2V 5.0 – 7.2Ah Cylindrical (LifePO4) |
| Cycle Performance | 2500 Cycles @ 100% DOD |
| LCA | 1000 |
| Ingress Protection | IP54 |
| Case | ABS (flame retardant plastic) |
| Operating temp Range | -30 to +80 degrees C |
| Terminals | Top Mount M8 Stainless steel / Copper |
| Parallel Connections Only | Yes |
| Warranty | 4 years |
DCS-24V 100AH BATTERY
All DCS batteries now feature our comprehensive Bluetooth System available on both Android and Apple operating systems that shows a lot of cool things.
- Cell status showing real-time cell balancing operation
- BMS MOSFET temperature (great info when you are winching or running a large inverting load or your trolling motor to know how hard you are pushing the electronics).
- SOC% estimate (using impedance tracking – the App learns the SOC after the first 10 cycles)
- Battery pack voltage and cycle count
- Amp meter – showing charge and discharge current
- Connectivity distance up to 10m
- Now there is no need to install battery monitors or shunts in boats, campers or vehicles. You have all the info you need at your fingertips.
- The SOC estimate is accurate on single batteries, the more batteries that are expanded in parallel, the less accurate the SOC becomes.
- This free application provides the perfect tell-tale about the battery packs’ state of health as it ages
- Assists installers & integrators to quickly diagnose any system issues
VICTRON BLUE SMART IP67 24/12 CHARGER
Battery Management
Lead-acid batteries should be charged in three stages, which are;
- Bulk or constant-current charge
- Absorption or topping charge
- Float charge
Several hours of absorption charge are needed to fully charge the battery and prevent early failure to sulfation. The relatively high voltage during absorption does however accelerate aging due to grid corrosion on the positive plates. Adaptive Battery Management limits corrosion by reducing absorption time when possible, that is: when charging a battery that is already (nearly) fully charged.
Recovery of fully discharged batteries
Once the battery is connected, the charger immediately detects voltage and polarity. If the battery is connected incorrectly, all status-LEDs will start blinking. No sparks will occur. Most of such chargers do not charge the fully discharged batteries. Whereas, Blue Smart IP67 charger will get it done by starting with low power and when it is charged with adequate voltage, it will come to normal charging.
Model
The Blue Smart IP67 Charger is supplied as a 24V 12A output.
(DCS-24V-100AH-VICTRON-TRO)
| SKU | DCS-24V-100AH-VICTRON-TRO |
| Brand | Deep Cycle Systems |
Be The First To Review This Product!
Help other Auto Parts Co PTY LTD users shop smarter by writing reviews for products you have purchased.
