Jaylec Black Series Performance Alternator 12V 240A - Isuzu D-Max 2012-07/2020
See Notes Prior to Ordering
$999.00
RRP $1,099.00
SAVE $100.00 (9%)
In Stock
The Jaylec Black Series Performance Alternator is a high-output replacement alternator designed for performance and heavy electrical loads. It delivers 240A at 12V and is built for applications that require higher amperage at lower cut-in speeds.
Features:
- Higher output (amperage) at lower cut-in speeds compared with many OE alternators
- Intended to run high-demand components at idle such as dual thermos-fans, injection systems, air conditioning, electric steering, monitoring systems, upgraded lighting systems and winches while maintaining battery levels
- Efficient cooling fans and high-quality bearings for reliable operation
- All Black Series alternators have been amperage rated Hot and Cold
- 13.5V @ 125A Cold - Cold is the alternator rectifier at 40ºc (maximum output)
- 13.5V @ 110A Hot - Hot is the alternator rectifier running at 96ºc for ½ hour (normal operating condition)
- Warning: This high output alternator requires upgraded cabling to suit; consult your auto electrician before installation
Notes Before Ordering:
- There are a few things you will need to Check on your own Vehicle BEFORE placing an order.
1:
- There are a couple of different brand Alternators used in these models, which does not matter, but what does matter is there are 2 different Regulators used in D-Max & MU-X Alternators. Either a LIN Type Regulator or an L,M Type regulator.
- We have provided an image that shows the LIN being identified on the Alternator & although your Alternator may not be identical to this one in the image, it will still have either LIN or L,M on the sticker on the Alternator.
- This Kit ONLY Suits Alternators that have the LIN Type Regulator
- It Does NOT Suit Vehicles that have the L,M Type of Regulator
2:
- There are 2 types of Lower Mounting Brackets on these Alternators.
- Either a 2 Piece Mount End Mount or a Centre Mount as shown in images
- Image Number 1: The 2 Piece Mount is at Either End of the Alternator
- Image Number 2: The Centre Mount is in the Middle of the Alternator
- This Kit ONLY fits Vehicles with a Centre Mount Lower Mounting Bracket.
- It does NOT Suit Vehicles with the Mounts at Either End of the Alternator
3:
- So to place an order, you must 1st have Confirmed that you have a Centre Mount Alternator with an LIN type regulator.
- If Not, this kit will Not suit and we do Not have a Kit for the other Variants.
4:
- We have no upgrade options available for vehicles with the 2 piece mounts at either end of the alternator.
5:
- To upgrade the alternator on these models, you will need to upgrade the Alternator & Earth wiring harness along with the main engine fuse from the battery to accomodate the larger Alternator.
- This will require a custom made harness.
(BKS-240TFS)
| Voltage | 12V |
|---|---|
| Amperage | 240A |
| Mount leg ID | 59mm |
| C-C mounts | 161mm |
| Hole ID top | M8 |
| Hole ID bottom | 10mm |
| Shaft size | 17mm |
| Pulley type | 7PV, Fixed |
| Pulley grooves | 7 |
| Pulley diameter | 62mm |
| Regulator type | Internal |
| Terminals | B+, L, M |
| Excitation | External |
| Ground | Negative |
| SKU | BKS-240TFS |
| Brand | Jaylec |

